Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I need help -WinCC 6.0 SP2 alarm logging

Created by: vadrian at: 12/16/2007 1:02 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/16/2007 1:02 PM	Rate (0)
vadrian Posts: 20 Rating: (0)	Hello I have migrated a WinCC project from V5.1 to V6.0 SP2. The project is "server-client" typ (1 server and 1 client). The server is running OK, but on the client computer I can't activate "alarm logging" and "tag logging" so I can't see on the client any alarm or trends. On the server computer I have W2003 SERVER operating system and on the clientWXP. Could anyone halp me to solve this problem?
vadrian Posts: 20 Rating: (0)
Suggestion To thank

12/29/2007 12:56 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/6/2024 Posts: 4109 Rating: (195)	closed cause question posted twice. The second thread with the subject WinCC 6.0 SP2 problem. Alarm logging and tag loging not active on the client is published within the conference SIMATIC WinCC. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on