Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO!SOFT V8, ADD LOGO PLC LOGIC MODULE

Created by: gabbar at: 1/13/2016 10:51 AM (6 Replies)

Rating (3)

Thanks 0

7 Entries

1/13/2016 10:51 AM	Rate (0)
gabbar Bronze Member Joined: 5/20/2015 Last visit: 11/4/2024 Posts: 216 Rating: (3)	HELLO ALL, I AM NOT ABLE TO ADD LOGO PLC LOGIC MODULE 6ED10521FB00BA6, THIS CAT NO IS NOT SHOWING IN DEVICE SELECTION WINDOW. I AM USING LOGO!SOFT V8.00 DEMO. PLEASE GUIDE, THANK YOU, gabbar ------------------------------------------------------------------------------------------ Split from Siemens LOGO V7 Starter Box only demo version. Attachment Untitled.png (412 Downloads)
	Last edited by: Min_Moderator at: 1/13/2016 12:45:22 PM New subject after splitting Let's do it...
Suggestion To thank Quote Answer

1/13/2016 11:21 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	0BA6 is not network-compatible. That's why you can not selected in netwerk project. You must go to the diagram mode. Because you can then select a 0BA6. And with the demo version you can only create a program, but not transmitted to the logo. Transfer is only possible with the full version.

Suggestion To thank Quote Answer

1/13/2016 4:40 PM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Here's a little Video. Attachment Test.wmv (424 Downloads)

Suggestion To thank Quote Answer

1/14/2016 7:03 AM	Rate (0)
gabbar Bronze Member Joined: 5/20/2015 Last visit: 11/4/2024 Posts: 216 Rating: (3)	thank you very much IXO65 ONLY ONE THING I WANT TO ASK YOU AGAIN AND I AM PRETTY SURE THAT YOU WILL GUIDE ME CORRECT. MY QUESTION IS IS IT POSSIBLE TO DOWNLOAD AND UPLOAD (LOGO PLC MAINTENANCE ) PLC PROJECT WITH LOGO!SOFT V8.00 DEMO VERSION? IF THAT LOGO PLC IS OBA6. THANK YOU REAGARDS gabbar
	Last edited by: gabbar at: 1/14/2016 7:04:27 AM Last edited by: gabbar at: 1/14/2016 7:22:45 AM Let's do it...
Suggestion To thank Quote Answer

1/14/2016 7:29 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Have I already written you yet. No, with the demo version it is not possible to make a program upload or download. Also an online monitoring with the demo version is not possible. In an 0BA7 or 0BA8, you can copy the program on the PC to the SD card and then insert the SD card into the logo. However, an 0BA6 has no SD card, but as an extra to buy accessories a memory module. In this memory module, the program can be copied directly from the logo, not from the PC.

Suggestion To thank Quote Answer

2/16/2016 1:24 PM	Rate (0)
gabbar Bronze Member Joined: 5/20/2015 Last visit: 11/4/2024 Posts: 216 Rating: (3)	Thank you sir... but i did it... by downgrading software... gabbar
	Let's do it...
Suggestion To thank Quote Answer

2/16/2016 3:07 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	If you have the full version of a previous version of Logo! Soft Comfort V8, no matter what, then you can still upgrade to the full version of LSC V8 for free. Upgrade From this side you can download the upgrade: Download the upgrade

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on