Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

mm430 F003 problem

Created by: mehkocak at: 4/22/2008 5:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/22/2008 5:59 PM	Rate (0)
mehkocak Posts: 11 Rating: (0)	hi I get problem ( f003 ) from siemens mm430 drives when an sudden electric drops happen.As I know, the kinetic buffering can be used to overcome this problem but when look at the parameters ,I have seen only the parameters ( p1240-p1260 ) for Vdc max controller not for Vdc min or kinetic buffering like in mm440. Can you help me to solve this problem. thanks for help.
mehkocak Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

4/23/2008 4:23 AM	Rate (0)
RalfS Regular Member Joined: 4/23/2008 Last visit: 9/11/2024 Posts: 12 Rating: (0)	Hi, unfortunately MM430 does not have a kinetic buffering function. Best Regards

Suggestion To thank Quote Answer

4/25/2008 9:14 AM	Rate (0)
Tractor Gold Member Joined: 3/27/2008 Last visit: 11/3/2024 Posts: 1144 Rating: (142)	If the run command is maintained,and Parameter 1210 is set to 6, the VSD will restart as the supply returns. This is not a complete solution but it may help. Check also that this proceedure is safe to apply, this is an Automatic Restart after Brownout and Blackout.
	Tractor
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on