Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with Simaticnet OPC Server and IBM Server

Created by: Jorge at: 3/7/2006 9:46 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/7/2006 9:46 AM	Rate (0)
Jorge Posts: 12 Rating: (0)	I have a IBM Server with 2 cluster xSeries 346, after install OPC Server IESoftnet Edition 2005 the machine continuosly reboot. There are any incompatibility among IBM and simaticnet?
Jorge Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

3/7/2006 10:23 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hi, would you please tellus what type and version of Operating System you use? Best regards J_Bell.
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

3/7/2006 2:47 PM	Rate (0)
Jorge Posts: 12 Rating: (0)	Windows Server 2003 Enterprise Edition SP1
Jorge Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

3/7/2006 4:23 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Oh, [:blush:] as far as I know only the Standard Server 2003 is released for SIMATIC NET, but with SP 1 for the Standard Server 2003 you need also the HF 1. So I am not sure if the SIMATIC NET Software Edition 2003 will work on your System anyway. Personally I doubt it. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on