Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Internal system error on a S7-416 CPU

Created by: dmd at: 8/26/2008 1:33 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/26/2008 1:33 PM	Rate (0)
dmd Posts: 1 Rating: (0)	Hi, I had a CPU stopped without an apparent cause. The module information says that the CPU had an internal error (see attachment). I did not replace de CPU and its running normally, I would like to know if this happened to anyone before and if I need to replace this CPU. Thanks. Attachment Tela de Diagnóstico.JPG (293 Downloads)
dmd Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

8/26/2008 3:49 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/5/2024 Posts: 8766 Rating: (1170)	Hi dmd, Does your CPU contains latest firmware? here you can download latest firmware cpu 416. Best regards, Wizard

Suggestion To thank Quote Answer

8/27/2008 7:52 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Hi, Something tells me that this is not firmware issue. If this CPU just stopped I think it may be some hardware defect (as it said in diagnostic). I can see later that it did memory reset. I suggest to try to reload program to PLC and if you still see diagnostic entry "DEFECTIVE" I think you should contact your local Siemens dealer as it may be defective CPU.
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on