Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Et200Eco F-DI/F-DO PN (6ES7146-6FF00-0AB0) GSDML for Step7 Classic?

Created by: ggeihs03 at: 10/9/2018 3:04 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

10/9/2018 3:04 PM	Rate (0)
ggeihs03 Regular Member Joined: 3/9/2015 Last visit: 9/19/2024 Posts: 17 Rating: (0)	Hello, Is it possible to configure the new 6ES7146-6FF00-0AB0 (ET 200eco PN F-DI 8 x 24 VDC, 4xM12 / F-DQ 3 x 24 VDC/2.0A PM, 3xM12) in Step 7 Classic Hardware config? If so, where can I get the HSP/GSDML file? We still have old projects that have not been converted to TIA portal and we are looking at using this device. We don't want to switch to TIA portal yet.

Suggestion To thank Quote Answer

10/9/2018 3:16 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 11/19/2024 Posts: 34241 Rating: (4264)	No. Engineering with: - STEP7 TIA Portal configuable/integrated as of version V15 with HSP 204 https://support.industry.siemens.com/cs/pd/1183235?pdti=td&dl=en&lc=en-WW

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ggeihs03

10/11/2018 1:59 PM	Rate (0)
Morten Bronze Member Joined: 9/27/2005 Last visit: 4/26/2024 Posts: 203 Rating: (32)	Hello, here a forecast: A solution is scheduled and will offered till end of 2018. It will based on a GSDML-file. With this, the module can also be used in STEP 7 V5.x Greetings

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on