Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Trying to reag a timer value from the PLC to WinCC

Created by: Rompof at: 12/10/2008 1:15 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/10/2008 1:15 PM	Rate (0)
Rompof Posts: 2 Rating: (0)	Hey Guys, Really hope you can help. Im a student at a company having to do my practicall and i have a problem with using WinCC flexible 2005. Im having to read two timer values from the PLC, the programmer structured their type's in the DB block asTIME and i cant seem to get them to display properly on the HMI. im not sure what to declare their tags as and what object to use from the tool box. The only way that i have found to view the values of the timers is by declaring theirdata typeas "Time ofDay", by using a Input/Output field, format field - Time. And when i run theHMI i get a valu always starting with 12:The minute from thePLC:the seconds from the PLC, but no the Split seconds. This may be a novice question but please could someone help - no one at my company knows how to do it??
Rompof Posts: 2 Rating: (0)
Suggestion To thank

12/10/2008 1:37 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/25/2024 Posts: 4109 Rating: (195)	closed cause question posted twice. The second thread with the subject Timers is published withinthe conference SIMATIC WinCC flexible. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on