Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

What is new in LOGO!Soft Comfort V8.3?

Created by: ixo65 at: 10/25/2020 7:59 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

10/25/2020 7:59 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/10/2024 Posts: 34180 Rating: (4258)	1.5 What's new in LOGO!Soft Comfort? 1.5.1 What is new in LOGO!Soft Comfort V8.3? The features described below are only used for LOGO!Soft Comfort V8.3. New features LOGO!Soft Comfort V8.3 provides the following new features: • New device type in the network project mode: LOGO! 8.3 device and LOGO! 8.3 slave device. • New hardware type in diagram mode: LOGO! 8.3 device and LOGO! 8.3 slave device. • Cloud-related settings for LOGO! Base Module: Support connecting LOGO! BM with Amazon Web Services (AWS) Cloud and synchronizing the data between LOGO! BM and AWS Cloud. • Certificate settings: Support checking the certificate information and updating the certificate. • Enhanced security settings: – Updated access control settings: Support displaying the access security status and adding web user and web guest user access. – Circuit diagram and network project encryption: Circuit diagrams and network projects saved in LOGO!Soft Comfort V8.3 and later versions are encrypted. – HTTPS is supported. • Online test of LOGO! TDE • Message text settings: Support Follow M27 settings character set. • Zoom function: Support changing the size of text and icons for LOGO! Soft Comfort. • Updated function block Message text: Support copying and pasting parameters of message texts in the same diagram. • Multi-line funtion: Support selecting multiple lines and connecting multiple lines to a block. • Ethernet connection configuration is moved to General tab of LOGO! settings. • Support eastern character for IO status name. • Support installing LOGO! Web Editor when you install LOGO! Soft Comfort V8.3.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users tenuke

10/26/2020 8:52 AM	Rate (0)
Tomixxl Posts: 2 Rating: (0)	When will it be available for download ?
Tomixxl Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/26/2020 9:45 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/10/2024 Posts: 34180 Rating: (4258)	Tomas K When will it be available for download ? For this can the user forum give no answer. Siemens has no official statement for this. Waiting ....

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Peterako

11/20/2020 10:59 AM	Rate (0)
Musti786 Advanced Member Joined: 9/7/2016 Last visit: 11/1/2024 Posts: 2 Rating: (0)	Already available.. https://support.industry.siemens.com/cs/ls/en/view/109783154
	Last edited by: Jen_Moderator at: 11/20/2020 13:26:21 Optimized link.
Suggestion To thank Quote Answer

11/20/2020 11:00 AM	Rate (0)
Musti786 Advanced Member Joined: 9/7/2016 Last visit: 11/1/2024 Posts: 2 Rating: (0)	Already available. Logo! Soft Comfort 8.3 Upgrade
	Last edited by: Jen_Moderator at: 11/20/2020 13:26:54 Optimized link.
Suggestion To thank Quote Answer

11/20/2020 11:01 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/10/2024 Posts: 34180 Rating: (4258)	Musti786 Already available.. https://support.industry.siemens.com/cs/document/109783154/download-for-logo!-8-3-software-upgrade?dti=0&lc=en-LS That is old .... The link to download the upgrade has long been published here in the forum.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on