Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S110 load to PG error

Created by: allemel at: 12/23/2014 9:04 AM (5 Replies)

Rating (1)

Thanks 0

6 Entries

12/23/2014 9:04 AM	Rate (0)
allemel Posts: 3 Rating: (0)	Hi, I connect the cu305pn and load current configuration to PG but i get an error: "The status of the connection does not permit the requested action. Check whether other applications are online! (ret = 0xbe0b006b)" I think there is no connection error but i get this error. Please help to fix that.
allemel Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

12/23/2014 9:24 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/20/2024 Posts: 22482 Rating: (3039)	Hi, which STARTER Version do you use? Which S7Online Settings do you use ?(TCPip; TCPip(Auto)? Regards Christoph

Suggestion To thank Quote Answer

12/23/2014 9:57 AM	Rate (0)
allemel Posts: 3 Rating: (0)	Software version 4.3.3.0 and connecting device via com port. and additional to this the link1,act1, link2 and act2 lights are on and i can not connect to device via tcp/ip. And i find out now there is a warning image on commisioning interfaces window near PC/PG interface change icon
allemel Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

12/23/2014 10:11 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/20/2024 Posts: 22482 Rating: (3039)	Hi, which operating system do you use? Use you the native COMPort of you PG or a USB Adapter? And which settings have you for PG/PC ? It should be "serial Cable (PPI)" Regards Christoph
	Last edited by: ChristophD at: 12/23/2014 10:13 AM
Suggestion To thank Quote Answer

12/23/2014 11:50 AM	Rate (0)
allemel Posts: 3 Rating: (0)	Hi, ThanksChristophD. It is all about serial cable PPI issue. I can connect and make the changes now. Regards,
allemel Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

1/19/2024 9:49 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (173)	New question published by FredyGNF is split to a separate thread with the subject Simotion load to PG error. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on