Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

15 redundant Modbus TCP/IP connection

Created by: hueng at: 2/24/2015 11:16 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

2/24/2015 11:16 AM	Rate (0)
hueng Posts: 4 Rating: (0)	hi, how can i create 15 redundant Modbus TCP/TP connection? Each redundant MODBUS TCP will link to different area of the substation and running on 3rd party system. refer attachment. Attachment Modbus TCP.pdf (665 Downloads)
hueng Posts: 4 Rating: (0)	Last edited by: hueng at: 2/25/2015 2:11:02 AM
Suggestion To thank Quote Answer

2/24/2015 11:48 AM	Rate (0)
Wüstenräuber Gold Expert Joined: 10/3/2008 Last visit: 8/28/2024 Posts: 961 Rating: (124)	Hi, to get a good answer you should give more information... 15 redundant Modbus/TCP connections => create 15 redundant TCP connections in NetPro and insert 15 instances of the redundant modbus block in your program. Wüstenräuber

Suggestion To thank Quote Answer

3/4/2015 12:10 PM	Rate (0)
Guddu123 Regular Member Joined: 4/17/2009 Last visit: 10/9/2024 Posts: 28 Rating: (0)	HI Wüstenräuber, Is it possible to use 15 numbers 443-1 or 343-1 redundant cards to communicate with third party system with one redundant H CPU. I understand that TIA CPU such as S71200 also support modbus TCP/IP but they are not redundant we can achieve software redundancy for switchover.
	Last edited by: Guddu123 at: 3/4/2015 12:16:04 PM
Suggestion To thank Quote Answer

3/5/2015 9:53 AM	Rate (0)
Kaulquappe Posts: 3093 Rating: (323)	Hello Guddu, can you make a small sketch what are you going to set up? Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (323)
Suggestion To thank Quote Answer

3/5/2015 12:29 PM	Rate (0)
Guddu123 Regular Member Joined: 4/17/2009 Last visit: 10/9/2024 Posts: 28 Rating: (0)	HI Kaulquappe, As per attached requirement we have considered CP343-1 OR S7-1214C redundant 11 TCP/IP cards. As per my understanding it may not be possible to use CP343 directly with 400-H system without S7300 CPU as a data concentrator. Please comment. Can it be possible to use S7-1214C CPU with its available PN interface for modbus communication? We are planning to mount S7-1214C CPU on din rail it will communicate with 400-H via switch & not through profiibus IM. Further all the S7-1214C will communicate in standalone mode with 400-H & we will achieve data redundancy in software. Attachment Rough Architecture.png (536 Downloads)

Suggestion To thank Quote Answer

3/5/2015 7:52 PM	Rate (0)
Kaulquappe Posts: 3093 Rating: (323)	Hello Guddu, you are right, a CP343 can't be used without S7-300 CPU as data concentrator. Yes, you can use CPU 1214C for ModbusTCP communication. Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (323)
Suggestion To thank Quote Answer

3/10/2015 10:42 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by AutoGen_310314 is split to a separate thread with the subject How can i achieve S71214C redundnacy on profinet or profibus with S7400H?. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

ModbusTCP

Follow us on