receive SMS on CP1242-7 for S7-1200 and TIA V15.1

Hello,

I was found for sent "SMS" with CP1242-7 GPRS V2 ( 6GK7242-7KX31-0XE0 ), but I need "to receive" SMS, somebody can help me?

I want I sent SMS for PLC execute one fonction and sent me after when the operation is over.

I use the CP1242-7 on a PLC S7-1214 ( 6ES7214-1HG40-0XB0 ) and TIA V15.1 SP3.

Thank you for your help.

Hello NeoNavy;

Have a look at the following Application example, it might gve you hints for your own project:

https://support.industry.siemens.com/cs/ww/en/view/58638283

The following functions are realized in this application example:

• Sending an SMS to one parameterizable phone number,
• Sending a message to several subscribers (broadcast),
• Sending a message with acknowledgment by one of the configured recipients of the message (escalation),
• Receiving messages.
  Depending on the message text,

• requested values are read out of the controller and sent to a mobile phone,

• received commands are executed in the controller and a confirmation/error message is sent to the mobile phone. 

Hope this helps,,

Daniel Chartier  

Ok, thank you for your help, but I can't use it: it is too complex for me (I am a beginner automation engineer).
I try to use the TRCV_C ("only"), but it is not work:
I put 1 on EN_R and CONT, I put TCON_Phone (ID: 16#1, ConnectionType: 16#14, ActiveEstablished: true, PhoneNumber: "sms sender number"), "empty string" on DATA.
But I have BUSY on true and STATUS on 16#7006 (=data receiving) all time.
But I never recevied data on DATA (INOUT).