Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6ED1052-1MD08-0BA1/Pt1000

Created by: A11G11 at: 9/24/2023 10:39 AM (16 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

10/1/2023 2:09 PM	Rate (0)
A11G11 Joined: 9/9/2023 Last visit: 7/18/2024 Posts: 24 Rating: (0)	All of this still doesn't explain why I can't get a signal out of the AM2 AQ. If I put an On/Off at the same temperature I will have a problem with switching on and off unexpectedly, 120c° the fan starts 5 seconds after it turns off and so on.If the Off temperature is sufficiently lower then there is no longer a problem. In the hope of making myself understood.Thank you anyway for giving me your time on a Sunday.

Suggestion To thank Quote Answer

10/1/2023 2:12 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34239 Rating: (4263)	I can't say anything about that, I don't know your program or the wiring.

Suggestion To thank Quote Answer

10/1/2023 2:17 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34239 Rating: (4263)	In attachment a little program. Attachment Fan_control_8.3.zip (308 Downloads)

Suggestion To thank Quote Answer

10/1/2023 3:21 PM	Rate (0)
A11G11 Joined: 9/9/2023 Last visit: 7/18/2024 Posts: 24 Rating: (0)	I still have the same problem with your program.AQ 1 displays the values 250/500/750/1000 correctly.My wiring must not be good.I'm sending you a photo without knowing if it will help you. Your assistance will probably stop there. You've already done a lot.Thanks for your help. Attachment PXL_20231001_093540547.jpg (299 Downloads)

Suggestion To thank Quote Answer

10/1/2023 3:34 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34239 Rating: (4263)	You definitely have errors in the wiring. You use a brown wire to bridge from U1+ to M1. This short-circuits the voltage output. You have to remove this brown wire. You connected the blue wire in the top row, that is the functional earth (not protective earth), so it is also wrong. The blue wire belongs on M1. The voltage in the first channel of the module is output between terminals U1+ and M1. Current would be output in the first channel between terminals I1 and M1.

Suggestion To thank Quote Answer

10/1/2023 3:42 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34239 Rating: (4263)	And you have no power supply (230 VAC) by the dimmer module. No wiring on terminals N and L ...

Suggestion To thank Quote Answer

10/1/2023 3:52 PM	Rate (0)
A11G11 Joined: 9/9/2023 Last visit: 7/18/2024 Posts: 24 Rating: (0)	Indeed I now have an output voltage! As for the problem with the variator, I will check it with my dealer. Thank you again for your help and congratulations on your efficiency.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on