Hello

I need quick info about 802d sl system
I'm tranee in factory and want to retrofit turning machine with 802d sl system but my turning machine has got four axis ;two of them are diameter axis,So i need to know how can iplaces in ordertheaxis e.g( x. z. a. b. Sp or x. z. Sp. a. b.)
Is it important or not for put in order the axis.

second question is how can i adjust spindel axis on screenfor seeing position

Thanks for helping

BR

Yes it important to put them in order…

>First ALM/SLM module>Spindle(18A)>higher rating module(for example X,Z axis 9A) > lower rating rating (for example A,B axis 5A)

>Once you commission the Machine parameters and the drive data's you can able see the spindle position on the screen. Spindle should have the feedback(Encoder)


Check it out….

Regards,
Ekalavya