Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

810C change to english

Created by: makaveli at: 7/5/2011 11:57 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/5/2011 11:57 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	Hi, I have one question in 810C i have German i want to change it do English so i need to put 1 in MD250 (milling machine). Unfortunately biggest machine data is 171. Any advise... with regards, makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

7/5/2011 12:19 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (476)	Hello.... I think NC software in Epromneed to be updated with the higher version then you can see this parameter 250..... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (476)
Suggestion To thank Quote Answer

7/5/2011 1:36 PM	Rate (0)
makaveli Posts: 259 Rating: (5)	Thx for advise but I think it will be easy to working with German. Maybe I tell what's going on this machine. When in MDA or in Auto mode operator write comment G0 or G1 and than Axis for example X1000 so machine should move to this position. But in this case machine move in other direction to different potion simply saved randomly and this is happends in all axes. Other things this traversed movement is jerky sometimes. with regards, makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

7/11/2011 10:01 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	Hi, I find out what was wrong on this machine. Linear measuring encoders was broken in two axes. And also we have problem with EXE-TTL converters. Someone have maual for this device (i mean EXE-TTL)? with regards, makaveli Attachment IMG1519.jpg (55 Downloads)
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on