1/19/2019 10:44 AM | |
Posts: 1 Rating:
|
One of our 840D CNC two axis machine is often stopping on error no 2000. Did few activities as per details. still error appearing. Need support. Activities done; We have two racks of PLC modules with two IM. One module failed and replaced. Other one replaced on doubt. Error appearing and earlier PLC was going to stop mode, after replacing defective IM ts not going to stop mode. But stopping with error 2000 ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 1/21/2019 11:37:04 AMNew subject after splitting |
|
1/22/2019 12:50 AM | |
Joined: 10/17/2007 Last visit: 9/4/2024 Posts: 4012 Rating:
|
alarm 2000 PLC sign-of-life monitoring--that mens you PLC stop running for some reason--you need to use SIMATIC manager (STEP 7) tool to online troubleshooting --you will find which is the root cause--very possible hareware problem. If you no that software you need call services--to get the one who can use that sw tool to help you
|
If you like my comments please |
|
Follow us on