Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

95u & 100u

Created by: Jason_hunt at: 10/29/2010 10:07 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/29/2010 10:07 AM	Rate (0)
Jason_hunt Posts: 29 Rating: (0)	Dear Experts, i have a machine with 95U which encounter a problem few days ago. but i dont have any spare 95u but i have spare 100u Now it is possible to use 100u instead of 95u? Please tell me details Thanks
Jason_hunt Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

10/29/2010 12:49 PM	Rate (0)
safety4ever Experienced Member Joined: 12/5/2006 Last visit: 4/12/2023 Posts: 73 Rating: (4)	Dear Isteak The 95U and 100 U are considered from the same family i.e they share same back plane bus and modules. However the concern is that the 95U is a little bit more sophisticated than a 100U i.e it have built port ( High speed counters and onboard analogs) also depending on the CPU 95U you had you might have an additional port also either for serial or profibus communication. Also the standard block library and DB1 would be different. Do not also forget that the 95U does have onboard inputs and outputs which would have to be added as extra modules in the 100 U if they have been used on the 95U. I am putting a reference to the 2 manuals below for your reference 95U p://support.automation.siemens.com/WW/view/en/1091648 100U http://support.automation.siemens.com/WW/view/en/1091978 Regards

Suggestion To thank Quote Answer

11/26/2010 5:45 AM	Rate (0)
fjmm Posts: 19 Rating: (1)	Hello isteak: Let´s take a look for a number like this, 6ES5-095-8MC01, which is the exact model of your CPU 95 Best Regards FJ
fjmm Posts: 19 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on