Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

About Double Motor Module

Created by: RetroK at: 1/23/2015 3:42 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

1/23/2015 3:42 AM	Rate (0)
RetroK Bronze Member Joined: 5/1/2013 Last visit: 8/12/2022 Posts: 425 Rating: (3)	When do weuse the DMM(Double Motor Module) instead of SMM?I want know what is the reasons and benefits of DMM. What is the benefits of DMM.And, I want know a case that you can not use the DMM. Thank you.

Suggestion To thank Quote Answer

1/23/2015 5:03 PM	Rate (0)
Deleted User Posts: 767 Rating: (69)	Hello RetroK, With mention of Double Motor Module, this seems to reference SINAMICS S120 multi axis modular drive (i.e. common dc bus). Double Motor Modules can be used to up to and including 18 Amp rated current continuous for both outputs at same time to each motor (i.e. load). Double Motor Modules rated current 3 Amp, 5 Amp, and 9 Amp rated current continuous provide a savings in widthfor overall drive system footprint vs. using two separate Single Motor Modules. Double Motor Modules rated current 18 Ampcontinuous is same widthvs. two separate Single Motor Modules of rated current 18 Amp. In most cases there will be a small savings in product cost to use a Double Motor Module vs. two separate Single Motor Modules. Best Regards, Deputy
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users RetroK

3/10/2016 10:34 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4827 Rating: (123)	New question published by JigneshD is split to a separate thread with the subject S120 Double motor module, individual running current value of motors. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on