Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

About Screen

Created by: freeman1907 at: 6/22/2012 10:05 AM (9 Replies)

Rating (0)

Thanks 2

10 Entries

6/22/2012 10:05 AM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Hi All I would like to controll my hmi screen from s7 1200 plc is there any chance to do this, if yes how?? For example at hmi, you click F1 and screen goes to "setting screen" and in setting screen you click F2 screen goes setting screen 2,3,4..etc.. With Kind Regards
freeman1907 Posts: 28 Rating: (1)	Last edited by: freeman1907 at: 6/22/2012 10:05 AM
Suggestion To thank Quote Answer

6/22/2012 10:13 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Please tell us what screen you have there, most screens have option to select screen with PLC. To be sure whe need the MLFB off the screen. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

6/22/2012 10:36 AM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Hiii Is it important what screens ı have?? cause I haven't determine yet. With Best Regards
freeman1907 Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

6/22/2012 11:39 AM	Rate (0)
fbelic Posts: 327 Rating: (28)	Greetings "you click F1 and screen goes to "setting screen" and in setting screen you click F2 screen goes setting screen 2,3,4..etc" How is that control from PLC? You can do all this without PLC, just with HMI. This is the usual way... Best regards
fbelic Posts: 327 Rating: (28)
Suggestion To thank Quote Answer

6/22/2012 11:41 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	freeman1907 Hiii Is it important what screens ı have?? cause I haven't determine yet. With Best Regards Not the screens but the ordernumber of the HMI itself, different hmi is different options and solutions. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

6/22/2012 11:56 AM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Hii Ok i understood,... My hmi is KTP 600 BASİC PN order number: 6AV6647-0AD11-3AX0 With Kind Regards
freeman1907 Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

6/22/2012 12:04 PM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Hii You can do that with hmi, but i heard that you can also do with plc,i dont know also how??? and it is more flexible and short.. So i asked for it if somebody helps me?? With Kind Regards
freeman1907 Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

6/22/2012 12:13 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, You don't need to use PLC to change screens as mentioned above. Simply add the correct function to the F-keys. See picture attached. Regards, Marcjan Attachment screenchange.JPG (102 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

6/22/2012 12:34 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/5/2024 Posts: 8766 Rating: (1170)	Hello freeman1907, It is possible to change screen by using the F-buttons of panel, like already mentioned. But it is also possible to change screen by using PLC. You can use a tag1. Go to properties -> Events and use "Value change" -> Activate Screen by number. And then you can use a Tag to specify the screen you want to select. Best regards, Wizard

Suggestion To thank Quote Answer

6/22/2012 1:12 PM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Hi all Thank You very much it is resolved With Best Regards
freeman1907 Posts: 28 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Wizard Marcjan

|

Share this page:

Share this page on...

Follow us on