Access bits of the status word sinamic via TP1200

Dear Expert,

How is access bits status word sinamic S120 with HMI panel TP1200?

Thanks and best regard

Kumis

Dear Expert,

How is access bits status word sinamic S120 with HMI panel TP1200?

Thanks and best regard

 You have the status word in the drive control block DB.

Correct. The question is whether you control your drive from your PLC. The status word is part of the cyclic telegrams then. So you could easily use this information from the PLC for your HMI.

It looks different if you have no PLC but a direct connection from HMI to drive. 

Hi,

here is an application example how to do the direct connection between HMI and SINAMICS:

https://support.industry.siemens.com/cs/de/en/view/109481157