Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Acknowledge of Discrete Alarms in WinCC Flexible 2005

Created by: mbn at: 10/26/2006 11:17 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/26/2006 11:17 PM	Rate (0)
mbn Regular Member Joined: 9/29/2005 Last visit: 6/21/2024 Posts: 25 Rating: (0)	Hello Can it be true that you can NOT have more than one alarm refering to the same acknowlede trigger bit? If you try to setup for example 2 discrete alarms with different alarm triggers, it can NOT have the same HMI Ack Tag trigger bit, or PLC Ack Tag trigger bit address. We have made stardard FC´s for Motors in Step 7, witch fits perfect for IGSS Scada system, or other Scada systems where you can have one Ack adress for the whole Object (Motor). A Motor FC have up to 3 different alarms, and only one Ack Adress. My problem is now that these standard FC´s do not fit with an Siemens Panel, because of that Ack trigger bits has to be Unique. Can anyone tell why it is so, I can not se any point in that? Or can anyone se a solution to this, besides changing our stadard FC´s? It seems like an software thing inside WinCC Flexible, that only does unique addresses, Maybe it could be turned off, in some setting or se inside WinCC Flexible? Please let me you if you have an idea brg. Morten

Suggestion To thank Quote Answer

10/27/2006 8:17 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi perhaps can give you the manual chapter 6.1.2.2 some help?? http://support.automation.siemens.com/WW/view/en/18796010 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

11/3/2006 3:17 PM	Rate (0)
mbn Regular Member Joined: 9/29/2005 Last visit: 6/21/2024 Posts: 25 Rating: (0)	Hello I have solved the problem by making two tag´s inside WinCC Flexible with same adresses, but with different tag names. Then the software accepts having the same acknowledge address. Brg. mbn

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on