Alarm history display

Hi

I ve created the alarm log in the historical list. There the path allowed is only \USB_X60.1 to \USB_X60.4.

The alarm view that I ve created in alarm history page has been changed to alarm log in the display properties

However I dont see any mode that allow me to change to complex which i saw the manual for this alarm page.

There is no alarm history display in the alarm view in my alarm history page

Thanks & Regards 

Lau

------------------------------------------------------------------------------------------
Split from Events and Alarm Logs Archiving and Viewing Back.

Hello waikenun_lau

You can use the Alarmlog-view only with TIA Portal V13 SP1 image for Basic Panels 2nd Generation.

so in Versions older than V13 SP1 you can only log the alarms but not display the log entrys.

(Dont ask me, its stupid...)

When you have V13 Sp1 and you cannot use the Alarm view to show the Log entrys then

click on the Panel in the Project tree -> rightclick-> properties-> Changedevice/Version

select the Panel again and see if the Version is V13_0_1_0 now.

Then you can use the functionality.

Bye Murof