Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog in

Created by: hdhosseini at: 9/13/2010 10:54 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/13/2010 10:54 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 1/8/2025 Posts: 6858 Rating: (1366)	Hi Analog input module 6ES7 331-7KF02-0AB0 is capable of converting different types of analog inputs to digitized values.This is my question: Is there any hardware selection inside this module to select the type. Any body checked it for connection to RTD and thermocouple, any result? Best regards hdhosseini Attachment ANALOG IN.zip (362 Downloads)
	Last edited by: hdhosseini at: 9/13/2010 10:56 AM Demo Channel on Youtube
Suggestion To thank Quote Answer

9/13/2010 1:04 PM	Rate (0)
Aret Posts: 2348 Rating: (265)	There is a switch on the side - so you can configure it to any mentioned type of signal. Please ensure HW Konfig has the same configuration. I've tried it with pt100
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer

9/13/2010 2:30 PM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 1/2/2025 Posts: 4518 Rating: (841)	Hello hdhosseini, You have to be sure that the setting in HW config is correct according to type of your transducer and also it should meet the setting of the black squares in the side of the module itself. Please see the picture. Hope this helps. Attachment R transducer.JPG (332 Downloads)
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on