Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog inputs

Created by: Paulvdbo at: 5/7/2013 7:41 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

5/7/2013 7:41 AM	Rate (0)
Paulvdbo Posts: 27 Rating: (1)	Hi, I'm a novice in analog computing with LOGO. I have a LOGO 24RC OBA6 and can't get the analog inputs to work. Any suggestions/links ? Thanks in advance ! 6ED1 052-1HB00-0BA6 is the complete serialn° of my LOGO
Paulvdbo Posts: 27 Rating: (1)	Last edited by: Paulvdbo at: 5/7/2013 7:58 AM
Suggestion To thank Quote Answer

5/7/2013 9:15 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/20/2024 Posts: 8786 Rating: (1172)	Hello Paulvdbo, Have you seen this thread: /tf/WW/en/Posts/64110 and this faq: Connecting a potentiometer to the integrated analog inputs on the LOGO! module Best regards, Wizard

Suggestion To thank Quote Answer

5/7/2013 9:17 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, if your MLFB is correct, then this LOGO! doesn't support analog inputs onboard. Use an additional expansion module such as AM2 or change the LOGO! BM to one with analog inputs onboard. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

5/7/2013 9:52 AM	Rate (0)
Paulvdbo Posts: 27 Rating: (1)	thanks,wizard ... the "faq" - link seems to be what I need ... I'll try it this afternoon and let you know how it worked out.
Paulvdbo Posts: 27 Rating: (1)
Suggestion To thank Quote Answer

5/7/2013 10:05 AM	Rate (0)
Paulvdbo Posts: 27 Rating: (1)	Hi, Helmut Thanks for your reply On the housing of the LOGO I read : AC/DC 24V INPUT 8xAC/DC LOGO! 24RC Is this really the (only !?) 24V unit that does not support analog inputs ? If yes.. Which one do I need ? thanks in advance !
Paulvdbo Posts: 27 Rating: (1)
Suggestion To thank Quote Answer

5/7/2013 11:02 AM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/29/2024 Posts: 1197 Rating: (113)	You need a 12/24 RC LOGO! Powersupply 12 or 24V DC Only DC LOGO! support Analog inputs.You can also use an extensionunit, the AM2. It must also powerd bij 24 VDC

Suggestion To thank Quote Answer

5/7/2013 11:22 AM	Rate (0)
Paulvdbo Posts: 27 Rating: (1)	Aha ... OK... my mistake But admit that numbering of the different models IS at least a lttle confusing... Thanks every one for your concerns and replies, I'll try to exange my unit ...
Paulvdbo Posts: 27 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on