Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog value stabling.

Created by: Genious Brain at: 12/6/2010 5:00 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/6/2010 5:00 AM	Rate (0)
Genious Brain Posts: 15 Rating: (0)	Hello! I have a problem with moving object encoder for giving smooth anlog value. I would like to add some function which can make delay in this value for a avoiding ramping and adding filteration. Please suggest any type of funcition which can be suitable for sortingout such problems. I have a Simatic Manager V5.4. Best regards, RHEEL MERAJ
Genious Brain Posts: 15 Rating: (0)	Last edited by: O_Moderator at: 12/6/2010 7:37 AM contact data deleted
Suggestion To thank Quote Answer

12/6/2010 5:56 AM	Rate (0)
Yoga Shankar Posts: 288 Rating: (22)	Dear Rheel, You can include a hysterisis function to the basic aquisition itself, i.e.... After you get the value in "Real" format, compare it with a band gap from the previous value at a set interval. If the new value exceeds the old one in excess of this bandgap in either direction(+ve or -ve), you can replace the old value with the thiis value and also use this value as the changed value.
Yoga Shankar Posts: 288 Rating: (22)
Suggestion To thank Quote Answer

12/6/2010 11:46 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/24/2023 Posts: 6821 Rating: (1349)	Dear member Check similiar discussion on this post (Looking for a analog value smoothing function). regards
	Demo Channel on Youtube
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on