Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Ananlog Input signal from CEAG Remote I/O

Created by: kanan at: 5/19/2008 6:17 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/19/2008 6:17 AM	Rate (0)
kanan Posts: 133 Rating: (2)	Hi. Can anybody help me to know, if I connect 4-20mA sensor to CEAG remote I/O analog input(FB3205) module which connected through profibus line to s7 400 plc, what will I get as intiger range? I meen for s7 analog input module 4-20mA i have 0-27648 as intiger, what about CEAG remote I/O analog input module? thank you.regards
kanan Posts: 133 Rating: (2)
Suggestion To thank Quote Answer

9/1/2008 5:20 AM	Rate (0)
kanan Posts: 133 Rating: (2)	hi! still hope anybody will help! regards
kanan Posts: 133 Rating: (2)
Suggestion To thank Quote Answer

9/1/2008 12:25 PM	Rate (0)
Fatso Bronze Member Joined: 9/11/2006 Last visit: 3/17/2022 Posts: 168 Rating: (6)	Hi kanan The range will be 16#0 to 16#FFFF

Suggestion To thank Quote Answer

9/2/2008 9:51 AM	Rate (0)
kanan Posts: 133 Rating: (2)	hi Fatso! thanks for reply, but i can not undestand-this is hex value yes? as i know for 20mA signal if intiger is 27648 the in Hex it is 6C00 but what is 16#0, FFFF? Please explain. regards
kanan Posts: 133 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on