Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Any possible to communication between from s7-1200 plc to vb6.0

Created by: Import-User-1 at: 3/11/2010 10:25 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/11/2010 10:25 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Import of a Technical Question of an User yechu wrote: Hi, i need some clarification in the above subject.. Any possible to communication between from s7-1200 plc to vb6.0 ... Thanks, Yechu
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

3/11/2010 1:28 PM	Rate (0)
Robster Gold Member Joined: 5/28/2008 Last visit: 2/18/2025 Posts: 1343 Rating: (141)	Yes, you can take OPC Server PCAccess or SImatic NET

Suggestion To thank Quote Answer

3/22/2010 6:45 PM	Rate (0)
CmD Posts: 3 Rating: (0)	u can use net simantec 2008 ilean (server OPC) but u are limit with 8 plc after u make a client opc with vb6 but u have other alternative u can use IGSS,Libnodabe ,Prodave. Libnodave and prodave are dll with that u can comunicate directly with your plc.
CmD Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/28/2010 3:30 PM	Rate (0)
Yu-wen Tang Silver Member Joined: 10/7/2009 Last visit: 2/10/2025 Posts: 266 Rating: (95)	I recommend you to connect PC and S7-1200 viaPC Access OPC Server and then program VB using OPC Automation 2.0 (OPCDAAuto.dll) or Siemens OPC DA Automation (SOpcDaAuto.dll).

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on