Audit Trail -> Copy to USB and Server Path failed

Hi,

I have some problems with the Audit Trail... first the configuration:

Tia Portal V13 Sp2 Update 2

TP1200 Comfort

Ok so.

I generate the Audit Trail with the selected tags for GMP. Everything is fine.

Now I am simulating it, and the Audit Trail file is generated in C:\\Storage Card SD\ as expected

First strange thing: the name of the file is not AuditTrail, but AuditTrail0

This is why probably everything else doesnt work.

I created a button to copy this audit trail in a USB. First event is to stop the audit trail, second event is separated in another button is to copy the audittrail with the archivelogfile. (see attachment)

But nothing happens... :(

I should also do the same thing with a "server path" defined by the customer... I have a field that the customer will use to write his defined path (ex: \\PC-NAME\sharedfolder\xxx) to copy the file, same procedure as above.

So... any suggestion? Could it be that it doesnt work because for some reason the file is renamed with a 0 on the end of it? I am confused...

Ok I probably found out the "problem".

I used the command "StopLogging" instead of "CloseAllLogs", so this prevented it to actually copy the audit file later.

The fact that the name has a 0 on the end is not a problem but its still a mistery to me.

Now I guess if there is a way also to simulate the copy to a path in the pc, but i guess not...