Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Blocks comparison

Created by: Kelu at: 11/22/2013 4:51 PM (6 Replies)

Rating (2)

Thanks 0

7 Entries

11/22/2013 4:51 PM	Rate (0)
Kelu Posts: 88 Rating: (12)	Hello, I would like to know how I can compare blocks between 2 differents projects? like it was possible in Step7 v5.5. I see we have Online/Offline or Offline/Offline but only possible between 2 devices in the same project. Thank you for answers. Best regards, Kelu
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

11/25/2013 6:54 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/8/2024 Posts: 15388 Rating: (2443)	Kelu Hello, I would like to know how I can compare blocks between 2 differents projects? like it was possible in Step7 v5.5. I see we have Online/Offline or Offline/Offline but only possible between 2 devices in the same project. Thank you for answers. Best regards, Kelu My answer is likely not normal nor ideal but it worked for a recent problem recovering changes made that resulted in a corrupted project. What I did was load the last good backup into my plc, verified it still performed sufficient for the programming within it. Next I opened the corrupted project that I could not download but could open and view. Now I went online and compared online to offline. That did exactly what you would expect and helped me identify changes needed in the working backup copy of the project. Hope this is useful for your own efforts.
	science guy
Suggestion To thank Quote Answer

11/25/2013 9:07 PM	Rate (0)
Kelu Posts: 88 Rating: (12)	Hello huggy_d1, Yes, thank you, it is a solution but like you say it's not very conventional... In fact actually there isn't any tools to do that properly without using a loaded CPU? Best regards, Kelu,
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

11/26/2013 10:36 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 10/18/2024 Posts: 1921 Rating: (136)	Hello, you can with STEP 7 (TIA Portal) V12 compare the both projects with "Offline/Online" or "Offline/Offline". You can compare all moduls and you can set a filter during the compare. With best regards Cicero

Suggestion To thank Quote Answer

11/26/2013 11:13 AM	Rate (0)
Kelu Posts: 88 Rating: (12)	Hello, I have V12 and I can't compare blocks between two differents projects as well. How you can do that can you show me please? Thank you Rgds,
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

11/26/2013 3:15 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/8/2024 Posts: 15388 Rating: (2443)	Kelu Hello, I have V12 and I can't compare blocks between two differents projects as well. How you can do that can you show me please? Thank you Rgds, When I searched the online portal help for V12 SP1 Update 2, I found this search topic: Comparing reference projects It explains how to do what you are looking for.
	science guy
Suggestion To thank Quote Answer

11/26/2013 9:42 PM	Rate (0)
Kelu Posts: 88 Rating: (12)	Ok fine, I found, thank you very much it will be very useful. TIP: reference projects in STEP 7 V12 Best regards, Kelu,
Kelu Posts: 88 Rating: (12)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on