Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

bookstores of macros for Eplan P8?

Created by: albnati at: 3/10/2009 9:46 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/10/2009 9:46 AM	Rate (0)
albnati Posts: 3 Rating: (0)	Where I can find bookstores of macros for Eplan P8 of products Siemens? Thanks for your attention. A. Natividad
albnati Posts: 3 Rating: (0)	Last edited by: Blue Moderator at: 10.03.2009 10:23
Suggestion To thank Quote Answer

3/10/2009 10:21 AM	Rate (0)
Tomcat Posts: 433 Rating: (48)	Hi, have a look at this: Search eplan P8. Tomcat
Tomcat Posts: 433 Rating: (48)
Suggestion To thank Quote Answer

3/10/2009 12:05 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/26/2024 Posts: 10228 Rating: (1181)	Hello Look at 6ES7991-0CD01-0YX0 SIMATIC,TECHNICAL PRODUCT DATA FOR CAX APPLICATIONS, (INDUSTRIAL AUTOMATION SYSTEMS), DATA MEDIUM DVD, (EDITION 2008) Technical product data for S7-300, S7-400 and ET 200 For in use in CAD/CAE applications Consists of: Component data as per ECAD component standard Dimensioned drawings for CAD/CAE systems Macros/Macro libraries regards

Suggestion To thank Quote Answer

6/28/2010 10:23 AM	Rate (0)
Krrish !! Posts: 73 Rating: (6)	Hello, Check out the following Link https://www2.sea.siemens.com/Products/Automation/CAD-Drawings.htm Some of the mechanical macros are very good. However, I did not find the electrical macros very helpful. Hence, I had to build my own macro database. Thanks & Regards, Krrish !!
Krrish !! Posts: 73 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on