Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Boot IOT2050 FS:05

Created by: edurov at: 1/16/2023 10:20 AM (4 Replies)

Rating (0)

Thanks 2

5 Entries

1/16/2023 10:20 AM	Rate (0)
edurov Regular Member Joined: 12/15/2016 Last visit: 11/30/2023 Posts: 34 Rating: (0)	Hello, I'm starting an IOT2050 with FS:05 and I have different situations than normal. When specifying boot priorities: fw_setenv boot_targets mmc0 mmc1 usb0 usb1 usb2 --> Set bootorder Just take 'mmc0' or if I indicate: fw_setenv boot_targets mmc1 mmc0 usb0 usb1 usb2 --> Set bootorder Just take 'mmc1' Attached image. Now if I want to boot from internal memory or MMC I have to configure it befor. Is this normal? Thanks, Attachment a.jpg (206 Downloads)

Suggestion To thank Quote Answer

1/16/2023 11:24 AM	Rate (0)
jan-k Silver Member Joined: 4/28/2015 Last visit: 11/22/2023 Posts: 570 Rating: (43)	You need to quote what you want to assign to the variable with newer versions for fw_setenv: fw_setenv var="value value value".

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bergmanu

1/16/2023 5:04 PM	Rate (0)
edurov Regular Member Joined: 12/15/2016 Last visit: 11/30/2023 Posts: 34 Rating: (0)	Thank you very much jan-k, I see on the internet that the sentence is fw_setenv var 'val1 val2 val3' But which device is each 'value'? also, I change 'val1' to 'val2' it keeps booting what I see in 'fw_printenv boot_targets' Looks like something else needs to be configured? Thanks,

Suggestion To thank Quote Answer

1/17/2023 7:44 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 12/8/2023 Posts: 3298 Rating: (370)	Hi, transfered to the IOT2050 it would be: fw_setenv boot_targets "mmc0 mmc1 usb0 usb1 usb2" Best regards!

Suggestion To thank Quote Answer

1/17/2023 4:18 PM	Rate (0)
edurov Regular Member Joined: 12/15/2016 Last visit: 11/30/2023 Posts: 34 Rating: (0)	This does work correctly. Thank you Bergmanu.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bergmanu

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2050 System

Follow us on