Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Browsing Tags

Created by: Jaymo at: 1/19/2010 5:17 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

1/19/2010 5:17 PM	Rate (0)
Jaymo Posts: 1 Rating: (0)	Hello, First time using WinCC Flexible (Standard - v2008 SP1). I have a project where I will connect an MP 277 to an AB CLogix. My question is: Is it possible to browse the tags in the CLogix while online with WinCC Flexible, or do I have to import the tags? Thanks, Jaymo
Jaymo Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/20/2010 7:20 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hello, You can only browse tags for Step-7 and only in this case if your WinCC Flexible installation is integrated into Step-7. So in your case you must import tags or enter them one by one. Also check this tool http://support.automation.siemens.com/WW/view/en/22060779 It might be helpful for you.
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jaymo

|

Share this page:

Share this page on...

Follow us on