Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

calling screens on a touch panel from plc

Created by: some3 at: 1/27/2013 6:31 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/27/2013 6:31 PM	Rate (0)
some3 Posts: 6 Rating: (0)	hi I am a beginer whit TIA v11 I am using s s7 1212 and a ktp 400 I need to change screens from the plc(when some conditions are set a screen is opend)for example whens switching modes on the machine by a switch on the cabinet or when a e stop is prest the basic screen is displaied how can I do that thank you
some3 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/28/2013 7:53 AM	Rate (0)
eray1907 Posts: 14 Rating: (0)	go to HMI tags and create new tag,then go to Properties-Events-Activate screen-Screen name.
eray1907 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

1/28/2013 9:07 AM	Rate (0)
some3 Posts: 6 Rating: (0)	ok I have done that it works on change value that means I need to make some sort of reset of this tag when screen is activated to reset this tag after the screen is activated or what?? when I want next time to call the screen I need to set the same bit agen
some3 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/30/2013 7:48 PM	Rate (0)
rQx Bronze Member Joined: 12/9/2010 Last visit: 9/18/2024 Posts: 162 Rating: (4)	Program this in the PLC, maybe use a "Timer Pulse" to activate the screen?

Suggestion To thank Quote Answer

2/8/2013 7:02 AM	Rate (0)
Nelliyan randy Posts: 461 Rating: (29)	Hi , Instead of moving & resetting the tags ,u can use this bit in a way which can be energised through the positive edge up of the respective operation at any instance of ur code. Now there will be no need for any reset or moving values like that. Hope it Helps Regards, Nelliyan.G
Nelliyan randy Posts: 461 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on