Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Camper Van automation with LOGO!

Created by: mvidovic at: 8/23/2024 10:48 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/23/2024 10:48 AM	Rate (0)
mvidovic Joined: 2/20/2024 Last visit: 10/28/2024 Posts: 3 Rating: (0)	Hi all, I am looking into implementing LOGO! PLC into my camper van for electrical energy control (solar pnels, elecrtic fridge, heating, AC etc...). Has anyone done this or have any ideas that I should think about before starting with this, should I use some specific controller for this or LOGO! will be good enough? Yes / No ? Thank you all in advance! :)

Suggestion To thank Quote Answer

8/23/2024 4:20 PM	Rate (0)
Ella_68 Gold Member Joined: 6/11/2019 Last visit: 11/5/2024 Posts: 2307 Rating: (102)	Hello mvidovic, That's a very general question.You have to explain exactly what you want to do. Regards Ella_68

Suggestion To thank Quote Answer

8/28/2024 11:18 AM	Rate (0)
mvidovic Joined: 2/20/2024 Last visit: 10/28/2024 Posts: 3 Rating: (0)	Well I am concerned about energy consumption of PLC, how much power will it drain, also I would like to know if it will hold up to vibrations and all other traveling problems (heat, cold, moisture and salt in air..) ? Should I worry about the environment around it or is it robust enough for its purpose? I want it to be reliable for at least 10 years.

Suggestion To thank Quote Answer

8/28/2024 8:28 PM	Rate (0)
Ella_68 Gold Member Joined: 6/11/2019 Last visit: 11/5/2024 Posts: 2307 Rating: (102)	All of this information is available in the manual, which you can download from Siemens. The Logo is designed for industrial use.Therefore, it has to withstand a lot. Best regards. Ella_68 (translated by Google)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on