Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can't able to communicate WinnCC Advanced V15 on simulator via TIAV15

Created by: Stepbyte at: 2/13/2019 7:31 AM (15 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

2/13/2019 11:49 AM	Rate (0)
Stepbyte Posts: 8 Rating: (0)	Hello, Still not getting values on wincc RT Advanced. PLC is communicating on simulator properly but TIA WinnCC RT ADvanced V15 nor communicating.
Stepbyte Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/13/2019 12:14 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/30/2023 Posts: 21352 Rating: (2820)	Hello, which Operation System do you use? Regards Christoph

Suggestion To thank Quote Answer

2/13/2019 12:52 PM	Rate (0)
Stepbyte Posts: 8 Rating: (0)	Window 7 professional, 64bit
Stepbyte Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/13/2019 2:56 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 3/30/2023 Posts: 2799 Rating: (455)	Hello Ankush, are you really using the same simulation-button for PLC and HMI or are you using the "Start RT"-button for the HMI? Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

2/14/2019 4:56 AM	Rate (0)
Stepbyte Posts: 8 Rating: (0)	Hello, Sir, I have tried both buttons RT and Simulation button. Firstly i have used simulatiion button for PLC and same button for HMI, After that i have used simulation button for PLC and RT button for HMI. I think the communication is Ok but the values doesn't transfer from Runtime to PLC. Regards, Ankush
Stepbyte Posts: 8 Rating: (0)	Last edited by: Stepbyte at: 2/14/2019 4:58:55 AM
Suggestion To thank Quote Answer

8/3/2022 4:38 PM	Rate (0)
dimpi Advanced Member Joined: 7/26/2017 Last visit: 2/15/2023 Posts: 18 Rating: (0)	Hello, Did you find any solution? I am struggling with the same issue. Thanks! Stepbyte Hello, Sir, I have tried both buttons RT and Simulation button. Firstly i have used simulatiion button for PLC and same button for HMI, After that i have used simulation button for PLC and RT button for HMI. I think the communication is Ok but the values doesn't transfer from Runtime to PLC. Regards, Ankush

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on