Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

?> Can TIA upload a program from PLC loaded with Step7 V5.x?

Created by: William_B at: 6/28/2014 12:34 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

6/28/2014 12:34 PM	Rate (0)
William_B Posts: 5225 Rating: (1195)	Hi-ya all. If I have a Profinet capable PLC that has been loaded with a program with V5.x, can I use TIA Professional V13 to upload the program? * The PLC is listed in the catelog of the TIA. * There is no password on the PLC. Alternatively.. If the PLC can be uploaded using Step7 Lite, is it possible to convert the uploaded program to TIA? Thank you. w LINK: https://support.industry.siemens.com/cs/ww/en/view/97554052
William_B Posts: 5225 Rating: (1195)	Last edited by: William_B at: 8/18/2015 7:15:10 AM add link for others reading this post
Suggestion To thank Quote Answer

6/29/2014 8:12 PM	Rate (1)
adrian_botez Bronze Member Joined: 2/19/2013 Last visit: 11/10/2024 Posts: 185 Rating: (9)	I have tryed to do this with a 314 C 2-PN/DP and it doesn´t work. Maybe with a newer version of a 3 series CPU maybe it will work.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

10/5/2015 10:48 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by mayorsam is split to a separate thread with the subject "The HW configuration was created with a newer version of STEP 7 on the basis of the TIA portal. The loading to the PG will be canceled". Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on