4/23/2012 4:18 PM | |
Posts: 947 Rating:
|
depassivation is to remove the oxide film from the battery contacts |
4/24/2012 10:01 AM | |
Joined: 12/1/2009 Last visit: 9/5/2024 Posts: 672 Rating:
|
Dear MrBin, what do you not understand in "short circuiting the poles for 1 to 3 seconds." exactly? Just take a short wire andconnect both polesof the battery with eachother for 3 seconds. I agree, I whish Siemens could come up with a better idea. What about a parallelcontact of the battery failure reset switch? Regards. |
Last edited by: TIBI68 at: 4/24/2012 10:02 AMGive us your feedback and show us your respect! |
|
4/25/2012 4:14 PM | |
Posts: 90 Rating:
|
Thanks everybody! I understood why item 3. is recommended. best regard! |
This contribution was helpful to
1 thankful Users |
7/15/2012 4:17 AM | |
Posts: 1064 Rating:
|
Change the battery with the plc on .If you shut off the plc you will lose the program .Just follow the steps listed earlier and you should be good to go |
Follow us on