Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Combined configuration with WinCC (TIA Portal) and STEP 7 (SIMATIC MANAGER)

Created by: AutoGen_3233562 at: 10/8/2024 5:14 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/8/2024 5:14 AM	Rate (0)
AutoGen_3233562 Joined: 8/14/2024 Last visit: 11/11/2024 Posts: 4 Rating: (0)	Hi everyone, I'm a newbie to this Automation world so I apologize if this question is Correct or Wrong. I'm working on a previous/old project for WinCC(screen) upgradation which was programmed on SIMATIC MANAGER STEP7 V5.x, Screen designs in SIMATIC WinCC flexible for SIMATIC S7-400 PLC. My question is, is it possible to design new WinCC Screens in TIA portal, and work with S7-400 PLC. and what are the necessary steps to be taken. Thank you very much to Whoever replies.

Suggestion To thank

10/8/2024 7:06 AM	Rate (0)
Moderator_Lan Moderator Joined: 7/30/2024 Last visit: 11/11/2024 Posts: 319 Rating: (7)	closed because posted twice. The active topic can be found here: Combined configuration with WinCC (TIA Portal) and STEP 7 (SIMATIC MANAGER) Kind regards, Moderator_Lan

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on