Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

COMPARING DATA

Created by: BA Baracus at: 3/29/2011 11:03 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/29/2011 11:03 PM	Rate (0)
BA Baracus Posts: 1 Rating: (0)	siddino Thanks, my problem was in KOP language, but in AWL language it's all very simple. Bye Hi dchartier and others, The type of comparing TOD as intergers (Dint) works not for this example: If you want to start a pump from 23:00 till 0:00, means you have the interger value for 0:00 = 0. You want to compare so that between 23:00 (so cmp>) and smaller then 0:00 (cmp<) Its not possible to compare less then 0:00. Has anyone a solution for this? I know you can compare the splitted byte format like byte 1 year byte 2 month. But i like to use the time (time of day) format in wincc flex and use it (first convert to Dint) to compare it easily. I also noticed that the integer value (in milliseconds) changes to fast for a compare equal to. any help?? would be apreciated.. Splitted from COMPARING DATA IN FORMAT TOD.
BA Baracus Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 3/30/2011 9:54 AM new subject after splitting
Suggestion To thank Quote Answer

3/30/2011 8:18 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	How do you specify the runtime for a timer via an operator panel, or how do you output the remaining runtime?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on