Navigation

Compatibility Step7 V5.4 and Step7 Basic

Created by: hartmut19 at: 4/13/2010 5:36 PM (1 Replies)

4/13/2010 5:36 PM	Rate (0)
hartmut19 Member Joined: 8/22/2007 Last visit: 10/25/2011 Posts: 2 Rating: (0)	Hello, I would like to transfer my function blocks (KOP/ Step7 V5.4) into Step7 Basic. Is this possible? Best Regards Hartmut19

Suggestion To thank Quote Answer

4/13/2010 9:54 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/13/2023 Posts: 4180 Rating: (1331)	Hi, at this momment it is not possible...
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

Share this page:

Share this page on...