Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Computer base training CBT

Created by: jonjon13 at: 10/31/2009 1:25 PM (3 Replies)

Rating (2)

Thanks 1

4 Entries

10/31/2009 1:25 PM	Rate (0)
jonjon13 Posts: 77 Rating: (1)	hi guys good day, any free computer base training for learning win cc and how to learn more reading and creating ladder logic please let me know. thank you. regards, jonjon13 jonjon_dm@yahoo.com
jonjon13 Posts: 77 Rating: (1)
Suggestion To thank Quote Answer

11/1/2009 12:56 AM	Rate (1)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 5/28/2024 Posts: 914 Rating: (40)	Dear jonjon13... Please, refer to the following site. I think it will help you. your friend tomy https://www.automation.siemens.com/fea/html_76/down_unterlagen.htm
	Aim Higher
Suggestion To thank Quote Answer

11/1/2009 7:18 AM	Rate (0)
jonjon13 Posts: 77 Rating: (1)	Thank you Sir Tomy, I will check that site. Have a nice day. Regards, jonjon13
jonjon13 Posts: 77 Rating: (1)
Suggestion To thank Quote Answer

11/2/2009 9:43 AM	Rate (1)
Fux Posts: 661 Rating: (123)	Hello jonjon13, on the S7-200 web page, siemens offered a CBT for LOGO! and S7-200. But with the new web design they hided it, so that you nearly cannot find it any more. Makes sense, doesn´t it? Finally i found it again: http://sitrain.automation.siemens.com/DE/sitrain/mcms/sitrain2/content/DE(en)/Training/Trainingstopics/Pages/Microautomation.aspx Hopefully THISweb addresswill be kept ...
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users jonjon13

|

Share this page:

Share this page on...

Follow us on