Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

comunication problem

Created by: Harekrishna at: 6/11/2012 11:40 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/11/2012 11:40 AM	Rate (0)
Harekrishna Posts: 1 Rating: (0)	respected Sir/mam When i communicate Betwwen S7-200 and OP77A with Profibus and MPI cable then the communication terminate immidiately. My project can not transfer to HMI.please reply me what is the problem behind this.
Harekrishna Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/11/2012 11:53 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/18/2024 Posts: 8738 Rating: (1168)	Hello, I guess you have problems transferring a project to HMI Perhaps this link might help: how can you transfer a WinCC flexible project via MPI/PROFIBUS to a Windows-based panel? Best regards, Wizard

Suggestion To thank Quote Answer

6/11/2012 12:45 PM	Rate (0)
Wishme Experienced Member Joined: 8/20/2009 Last visit: 5/21/2024 Posts: 80 Rating: (5)	Dear Harekrishna, S7-200 can't communicate on Profibus with OP77A. For MPI communication, pls check the address of the PLC and PG, both should have unique numbers. Also when the HMI is changed to transfer mode, PLC communication will be disturbed naturally. Vishp.
	Vishme. Hang on...may be we drop a step before Success.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on