Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Conecting operators panels with et200s

Created by: ssantiago at: 6/16/2010 3:09 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/16/2010 3:09 PM	Rate (0)
ssantiago Posts: 23 Rating: (0)	Hello. Is it possible to connect any Siemens Panel to et200s module? Sorry, if that question was ever discussed on forum.
ssantiago Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

6/16/2010 3:26 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, Look at What should you watch out for when connecting a SIMATIC HMI device configured with WinCC flexible ES to a SIMATIC ET 200 CPU?

Suggestion To thank Quote Answer

6/16/2010 5:04 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 9/2/2024 Posts: 591 Rating: (64)	Hi. From my experience. Sometimes, that the panel would see ET200s inputs/output it is necessary to activate check box "Test, commissioning routeing" in IM151-7. Best regards. Attachment my experience.jpg (104 Downloads)

Suggestion To thank Quote Answer

6/17/2010 7:33 AM	Rate (0)
ssantiago Posts: 23 Rating: (0)	Thank you wery much
ssantiago Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on