Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

configuration

Created by: nsenthil at: 2/20/2010 2:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/20/2010 2:00 PM	Rate (0)
nsenthil Posts: 9 Rating: (0)	in S7 300 cpu how can configure profibus network and ethernet network give an example with appropriate slva modules
nsenthil Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

2/20/2010 4:20 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello, It's very common question. Can you specify your existing hardware? This will helps to receive correct answer in target. best regards, Hristo Mihalev

Suggestion To thank Quote Answer

2/20/2010 5:21 PM	Rate (0)
RKarczewski Posts: 107 Rating: (1)	If I undertand You need information how add Slave station to the hardwareconfiguration in HW Config?. It's very simple. Everytheng You have in attachment. If itsn't what You wanted precisious Your question... :-) Attachment Profibus_SlaveUsing.JPG (72 Downloads)
RKarczewski Posts: 107 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on