Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

confirmation in stopping equipment

Created by: Manoranjan at: 8/11/2012 7:22 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/11/2012 7:22 AM	Rate (0)
Manoranjan Posts: 88 Rating: (0)	Dear Frnds, I have using PCS7. pls guide me for below query, To STOP the compressor one PUSH BUTTON is assigned. I want, while giving command to STOP the compressor, one pop block to be appear with comment like"ARE USURE TO STOP". pls guide me how to assign it in CFC or wincc.
Manoranjan Posts: 88 Rating: (0)
Suggestion To thank Quote Answer

8/13/2012 11:31 AM	Rate (0)
Silent Bob Posts: 836 Rating: (100)	It depends.... wich blocks are you using (APL blocks, written by your self, ...)?
Silent Bob Posts: 836 Rating: (100)
Suggestion To thank Quote Answer

8/13/2012 4:44 PM	Rate (0)
Manoranjan Posts: 88 Rating: (0)	Pls tell me how to assigned and wheather there is any block in library which can fulfill my requirement.
Manoranjan Posts: 88 Rating: (0)
Suggestion To thank Quote Answer

8/16/2012 5:53 AM	Rate (0)
Yoga Shankar Posts: 288 Rating: (22)	You can use the OPTrig block in the PCS7 library. This block is a binarypush buttonfunction block, where any change in the value has double confirmation. You can configure the text that appears for the action in the block properties
Yoga Shankar Posts: 288 Rating: (22)	Last edited by: Yoga Shankar at: 8/16/2012 5:54 AM
Suggestion To thank Quote Answer

9/3/2012 11:01 AM	Rate (0)
Manoranjan Posts: 88 Rating: (0)	Thanks for ur support. let me try, after that i will confirm...
Manoranjan Posts: 88 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on