Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connection to PLC

Created by: DROOP at: 2/3/2009 2:02 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/3/2009 2:02 PM	Rate (0)
DROOP Posts: 18 Rating: (0)	Hi, I have a CP5511 adapter and want to order a original profibus cable where I can connect my adapter to theMPIor profibus. Does someone no the order number?
DROOP Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

2/3/2009 2:49 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/4/2024 Posts: 4351 Rating: (1452)	Hi, take a look at catalogo ST70 page 6.5 (www.siemens.com/simatic/printmaterial): MPI cable 6ES7 901-0BF00-0AA0
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

2/3/2009 3:55 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	Hello Droop, I did not worked with CP5511 before but if you want to know order number of profibus cables, here we are: 6XV1830-0EH10: Standard; profibus cable; sold by meter. 6XV1830-0EN20: Standard; profibus cable; 20M. 6XV1830-0EN50: Standard; profibus cable; 50M. 6XV1830-0ET10: Standard; profibus cable; 100M. 6XV1830-0ET20: Standard; profibus cable; 200M. 6XV1830-0ET50: Standard; profibus cable; 500M. 6XV1830-0EU10: Standard; profibus cable; 1000M. Moreover, there's also profibus cables for food industry and for use under-ground,...etc. For furtherinformation, please see the CA01 Mall. Regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on