Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Controller alarms have different versions.

Created by: Bofely at: 6/5/2013 1:35 PM (4 Replies)

Rating (1)

Thanks 2

5 Entries

6/5/2013 1:35 PM	Rate (0)
Bofely Posts: 123 Rating: (5)	Hello. I have this alarm in my alarm display: Controller alarms have different versions. Please update your configuration. How do I update my configuration?
Bofely Posts: 123 Rating: (5)
Suggestion To thank Quote Answer

6/5/2013 3:40 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Where you see this alarm in Runtime or in the engineering system? Can you do a screenshot of your alarm? If you see this alarm in the runtime, which number has this systemmessage? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

6/5/2013 3:48 PM	Rate (0)
Bofely Posts: 123 Rating: (5)	In runtime (a simulation of runtime). System alarm no.300101 I can't find this number in the documentation. The alarm is configured with PLC 1500 Program_Alarm function block. Attachment Clipboard02.jpg (421 Downloads)
Bofely Posts: 123 Rating: (5)	Last edited by: Bofely at: 6/5/2013 4:30 PM
Suggestion To thank Quote Answer

6/10/2013 11:26 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, http://support.automation.siemens.com/WW/view/en/62121503 Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

6/10/2013 3:37 PM	Rate (1)
Bofely Posts: 123 Rating: (5)	The link is forS7-300/S7-400. Anyway. I found the solution. You also have to download the alarm texts to the 1500 PLC. On the S7-300 and S7-400 this is not needed. The system warning message tell you that the alarms configured for the PLC and HMI doesn't match.
Bofely Posts: 123 Rating: (5)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users O_Moderator Tweety

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on