Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP443-1 in Redundant PLC

Created by: Tariq at: 11/19/2008 9:38 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/19/2008 9:38 AM	Rate (0)
Tariq Advanced Member Joined: 7/28/2007 Last visit: 6/16/2023 Posts: 50 Rating: (1)	Dear Sir, I have redundant S7-414H PLC. In my both CPU's I have CP443-1 module which is communicating to engineering Station. Both CP's are connected in HUB. When i am trying to monitor my FC's i am going online with My primary CPU Rack(0). When i amstopping my Primary CPU, then secondary (CPU Rack(1)) becomes master but when i am trying to monitor my FC's, still its going online with STOP CPU Rack(0). but i want to monitor through other CPU Rack (1). When i am trying to downlaod, program is asking me in which rack i would like to download. Its working OK, but in monitoring its always going online with primary CPU in RACK 0. So, kindly tell me how to monitor CPU in RACK 1.??? Regards, Tariq

Suggestion To thank Quote Answer

11/19/2008 10:00 AM	Rate (0)
Tomcat Posts: 433 Rating: (48)	Hi Tariq, in SCL and in VAT you can choose your online CPU. Go to menu item "PLC" (or "Target sytem" or so) and you can choose it. Tomcat
Tomcat Posts: 433 Rating: (48)
Suggestion To thank Quote Answer

11/19/2008 10:24 AM	Rate (0)
Tariq Advanced Member Joined: 7/28/2007 Last visit: 6/16/2023 Posts: 50 Rating: (1)	Thanxfor your prompt reply Regards, Tariq

Suggestion To thank Quote Answer

5/11/2018 11:36 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 9/22/2023 Posts: 7305 Rating: (143)	New question published by Siemens-man is split to a separate thread with the subject How can add the CP443-1 (6GK7 443-1EX30-0XE0) to the SIMATIC MANAGER?. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on