Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 414-2XK05-0AB0 GSD file

Created by: siemens users at: 9/21/2008 12:55 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/21/2008 12:55 PM	Rate (0)
siemens users Posts: 7 Rating: (0)	Hello, We have bought a CPU 414-2XK05-0AB0. We installed GSD file of this CPU. We want to use this CPU as a master in profibus network.We download Hardware configuration without any problem,But as soon as we add an ET200M in the HW Config we can not download the hardware configuration.Our hardware configuration does not have any error when we compile it or use consistency check command.We selected another order number instead of our CPU order number.When we download our new configuration with an wrong CPU order number we have only one warning(online and offline configurationdiffer).In this way harware configuration is downloaded easily and our profibus network work without any problem. I think our GSD file is not safe or maybe another problem there is. What is your suggestion about this problem? Thank you very much.
siemens users Posts: 7 Rating: (0)
Suggestion To thank

9/21/2008 5:06 PM	Rate (0)
DeepakD Bronze Member Joined: 11/30/2006 Last visit: 6/7/2024 Posts: 118 Rating: (11)	siemens users Hello, We have bought a CPU 414-2XK05-0AB0. We installed GSD file of this CPU. We want to use this CPU as a master in profibus network.We download Hardware configuration without any problem,But as soon as we add an ET200M in the HW Config we can not download the hardware configuration.Our hardware configuration does not have any error when we compile it or use consistency check command.We selected another order number instead of our CPU order number.When we download our new configuration with an wrong CPU order number we have only one warning(online and offline configurationdiffer).In this way harware configuration is downloaded easily and our profibus network work without any problem. I think our GSD file is not safe or maybe another problem there is. What is your suggestion about this problem? Thank you very much. Can youupload your hardware configuration here . Mean time you check http://support.automation.siemens.com/WW/view/en/2850229 /tf/WW/en/Posts/21868#top
	Last edited by: Deeps at: 9/21/2008 5:07 PM
Suggestion To thank

9/21/2008 11:54 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/8/2024 Posts: 4111 Rating: (195)	closed cause question posted more than once. The active thread with all replies got the subject CPU 414-2XK05-0AB0 GSD fileand is published within the conference SIMATIC S7-400 / S7-400H / S7-400F /FH. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on