Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 948 protocol for communication with the PG

Created by: Ziemens at: 9/2/2014 8:10 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/2/2014 8:10 AM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 10/4/2024 Posts: 936 Rating: (5)	which protocol the CPU948 use for communication with the PG ? AS511 or RK512 ?
	Last edited by: CS Moderator at: 9/5/2014 9:30 AM new subject after splitting from /tf/WW/en/Posts/41805#top ... thank you ...
Suggestion To thank Quote Answer

9/2/2014 12:56 PM	Rate (0)
190B Platinum Member Joined: 2/8/2012 Last visit: 12/22/2014 Posts: 2347 Rating: (385)	AS511

Suggestion To thank Quote Answer

9/2/2014 1:24 PM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 10/4/2024 Posts: 936 Rating: (5)	i was trying to check it in the below manual, but could not find anything about AS511. http://support.automation.siemens.com/WW/view/de/15350394
	Last edited by: Ziemens at: 9/2/2014 1:25 PM ... thank you ...
Suggestion To thank Quote Answer

9/2/2014 3:15 PM	Rate (0)
190B Platinum Member Joined: 2/8/2012 Last visit: 12/22/2014 Posts: 2347 Rating: (385)	http://www.suetron.de/doc/80860698_30012QK0.pdf Page 7

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on