Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cpu s7-300 and mmc

Created by: SohaibAsim at: 12/23/2020 9:16 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

12/23/2020 9:16 PM	Rate (0)
SohaibAsim Posts: 14 Rating: (0)	Dear all Good day for you and I hope you are doing well Please i need answers for my below questions : 1- is it possible to download project to cpu without mmc? And is the project downloaded to mmc or to cpu? [snip] ... Best regards,
SohaibAsim Posts: 14 Rating: (0)	Last edited by: CS Moderator at: 12/28/2020 13:35:03 focus on question 1
Suggestion To thank Quote Answer

12/23/2020 10:33 PM	Rate (0)
Mambo_Tech Silver Member Joined: 1/28/2014 Last visit: 11/18/2024 Posts: 90 Rating: (20)	Hello, 1- is it possible to download project to cpu without mmc? And is the project downloaded to mmc or to cpu? No. This CPU use MMC for storing the project. Please check https://support.industry.siemens.com/cs/ww/en/view/7302326 [snip] ... Regards
	Last edited by: CS Moderator at: 12/28/2020 13:35:40 relevant reply to question 1 If you find the information useful, I would appreciate your rating
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users dchartier mindware

12/27/2020 8:13 AM	Rate (0)
SohaibAsim Posts: 14 Rating: (0)	thank you very much , your response is highly appreciated
SohaibAsim Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

12/28/2020 1:37 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/18/2024 Posts: 4113 Rating: (195)	Discussion splitted into three seperate threads. Second question: Cpu s7-300 and mmc - replace damaged cpu Third question: cpu 6ES7 IM 151-8ABOO-0AB0 replace by 6ES7 IM 151-01-8ABOO-0AB0 Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on